Displaying 451 - 500 of 514
Description
In most cases noise pollution is not within control. dBsense is invented to solve high noise level. This noise monitoring device is placed at the workplace to monitor hazardous noise level continuously. Should the noise exceed the specified level…
Classification
|
Description
A novel approach for single display unit for traffic light system is designed and developed based on problems seen over the conventional three display traffic light. As the role of the traffic lights plays significant role in ensuring road users…
Classification
|
Description
The demand for power supply increases tremendously from day to day. Power supplies are ranged into few categories in which the common available is engine dreiven fro a small scale users. For this, one need an engine running which consumes fuel to…
Classification
|
Description
This project present the design and development on the hardware and software of navigation control system for a Vision-Based Autonomous Guided Vehicle (V-AGV) by detecting and recognizing line tracking with Universal Serial Bus (USB) camera. In this…
Classification
|
Description
Heat is generated as disc breaking is being applied which is proportional to the deceleration of a vehicle. The heat energy can be recovered using a TEG to generate useful electrical power to operate a wireless alert system by sending a distress…
Classification
|
Description
-Transform waste energy into useful electrical energy for powering sensor nodes. -Unlimited life-span (>>battery life) -Require very little maintenance -Able to be embedded in buildings and structures. -Capable to be miniaturized (>50 cm3…
Classification
|
Description
Battery-Less Interactive Floor is an embedded human-interaction technology powered by human foot steps replacing battery. It is an integration of self-generating sensor as the power source for powering the microprocessor unit and wireless module…
Classification
|
Description
The Flood Observatory System is designed to be an intelligent system for monitoring flood at remote locations which has high frequency of flooding. This system is fully automated and operates without human intervention at all time. The Flood…
Classification
|
Description
Currently there is no traffic fault alert system to alert the contractor upon many multifunction of the traffic light or pole damage. To overcome these inconvenience, have come come up with solution system where, the contractor will be alerted by an…
Classification
|
Description
This single display traffic light system for colour vision deficiency drivers with embedded real time faults notification system is designed to implement the concept of green technology into traffic lights. The aim of this research is to introduce…
Classification
|
Description
Nowadays, the use of renewable energies has been progressively developed and one of them is wind energy. Wind energy can be transferred into various forms of mechanical dynamic movement that can be used to do work such as to turn the wind mill or…
Classification
|
Description
This product is to assist people who are having difficulties to walk due to amputation. Artificial leg have minimum dynamic constraint which unable to closely mimic the real behavior of human leg. A potentially more effective method is the use of an…
Classification
|
Description
Traditional linear way of working large fields requires longer period with full time expert operator. But, the developed Automated Spiral Motion Architect (ASMA)maneuvers the tractor automatically in spiral motion without the need of any operator.…
Classification
|
Description
Tire pressure plays an important role in ensuring safe and economical driving. Even then, many vehicles with under inflated tires are observed to be on the road due to the unawareness of the fact that properly inflated tires can safe tire life up to…
Classification
|
Description
Currently, the traditional door latches and locks are being replaces by magnetically operated locking systems especially for front desk hospitality. This system is widely used as it is simple in operation and installation. Hence, this type requires…
Classification
|
Description
A practical investigation shows that, to completely grass cut a field area of 10,000 m2 by an experienced operator (it took 3.5 hours), but when the same area was cut by ASMA took less than an hour. The machine will work continuously in the rain or…
Classification
|
Description
This research project was aimed to provide robust and economical solution for problems faced by large scale green field operators. Grass cutting of a large field requires at least two cutting stages by skilled operator to ensure good finishing. On…
Classification
|
Description
A specially designed of mini movable closet powered by solar energy with integrated of smart opening/closing system in utilizing sunlight and air flows as main drying agents in daytime. Meanwhile, the system is expected to utilize waste heat…
Classification
|
Description
Green CMAC reduces energy usage by using a radio receiver that is able to sleep for a certain period and thus saves on reception energy. Using cooperative transmission with multiple nodes that cooperate in a transmission process, the radio…
Classification
|
Description
Sistem penjanaan tenaga elektrik melalui penuaian elektrik dari persekitaran untuk mengoperasikan jaringan penderia tanpa wayar untuk memantau keselamatan enjin dan kompresor dalam industri
Classification
|
Description
This prototype is a battery-less and maintenance free wireless monitoring device which is able to monitor machinery vibration and trigger an alarm if the vibration level exceed a pre-defined safety level. The ambient vibration is the energy source…
Classification
|
Description
This research studies the machine vision system and how it may be integrated to assist a robot system sith artificial intelligent (AI). This research focuses on building a vision-based feedback system for robotics application that consists of image…
Classification
|
Description
The machine is specially designed to clean up compounded water such as recreational lakes, water reservoirs, sewage ponds, stagnant seas and slow flowing rivers. Its operation and navigation can be remotely controlled using radio controller or via…
Classification
|
Description
The machine is designed to clean up compounded water such as recreational lakes, water reservoirs, sewage ponds, stagnant seas and slow flowing rivers. Its operation and navigation can be remotely controlled using radio controller or via satellite…
Classification
|
Description
As part of The Global Aspiration Of Conserving the Environment, Green Energy Has Nowadays Become An Important Focus In Electrical Power Production. Water wheel is one of the main methods known to be capable of producing green energy. In this…
Classification
|
Description
The invention describes the development and application of electronic nose for halal authentication. The method was developed for rapid detection and differentiation (within 15 seconds) of pork from other types of meats such as a beef, mutton and…
Classification
|
Description
-New Technique for Laminate Composite Fabrication. -Low Cost Of Materials & Parts. -Easy Set-up. -Good Mechanical & Physical Properties. -Repeatable of Parts & Equipments. -High Quality Surface for Both Sides. -No Waste Part &…
Classification
|
Description
this invention is about a new innovative ceiling panel to replace current material, while improve from quality, performance and wide application. This invention also aims to optimize the performance of the sandwich composite product while maintain…
Classification
|
Description
This invention a new technique of plastic mould for thermoset composite fabrication. There is generally used a mild steel, tool steel, wood, and aluminium mould for moulding plastic products as they hard and tough. However the mould requires high…
Classification
|
Description
This invention presents a new class of rectifying circuit with receiving antenna for RF/Microwave energy harvesting. The design exhibits an improved RF-DC conversion efficiency better than 80% with output voltage in the range of 0.5-0.7V which is…
Classification
|
Description
This invention presents a new class of integrated rectangular Substrate integrated Waveguide (SIW) filter and microstrip patch antenna for RF/microwave front-end subsystems to produce filtering and radiating element in a single device ad would be…
Classification
|
Description
This invention presents an alternative method of designing diplexer which is based upon transverse electric-magnetic mode of propagation in order to separate two different frequency spectrums. The invention has the advantages with low loss, high Q-…
Classification
|
Description
The project, Innovative Controller for Home Security and Monitoring System (iCon) is a small and compact and affordable home security and monitoring, interfaced with the PC via designed interface, and added with additional data logging features.…
Classification
|
Description
Most Educational institutions tend to purchase lab equipments from local and international manufacturers where these equipments are normally extremely expensive especially the imported equipments from overseas. While ironically the staffs themselves…
Classification
|
Description
Due to high interest in high quality but low cost material, lost of researches have been done by the researcher and engineers. Together with the increasing usage of composite material from mixture of natural material nowadays, this technical report…
Classification
|
Description
The present invention relates to a complementary metal-oxide semiconductor for performing logical functions. The complementary metal-oxide semiconductor comprises a wafer, an oxide layer, an interfacial layer and a plurality of metal terminals. The…
Classification
|
Description
A method for producing an aqueous sugar solution from cellulosic materials comprising the steps of heating ground cellulosic materials with perchloric acid; neutralizing the heated materials with an alkali to yield a salt precipitate; and filtering…
Classification
|
Description
The present invention provides a bottle replenishing tool for lifting, conveying, and invertably positioning a water bottle onto a water dispenser, the bottle replenishing tool includes: a) a supporting structure adapted for supporting, transporting…
Classification
|
Description
The present invention relates to a biosensor for detecting and characterising a biological material. The biosensor detects and characterises the biological material based on its electronic properties. The biosensor comprises at least two electrodes…
Classification
|
Description
The invention is a system that been called smart winder. It is a new type of winder that can be used in radiography testing (RT). RT is one of the most used methods in non-destructive testing (NDT). It utilizes Gamma radiation source to check the…
Classification
|
Description
One of the most widely used electronic test equipment is oscilloscope which can display the shape of a video pulse appearing at a selected equipment test point in time domain. Spectrum analyzer also is test equipment which used to sweep over a band…
Classification
|
Description
SmartCycle Biofuel is a system that is able to turn food waste into electricity. It utilizes the biogas which is released from food waste and other organic waste to create electricity. First, the food waste is mixed with water to form a… |
Description
We created a mini portable mowing machine which has 3 sets of blades and an obstacle bar that serve different function. This machine is user friendly, safety, mini and portable, saving energy and time.
|
Description
This digital height measuring device is produced to facilitate the recording of students' height during SEGAK assessments in school. It's quite a special tool as it's convenient, user-friendly and time-saving. Obviously, it really helps PE teachers…
|
Description
Hazardous gas detection is a tool specially developed to detect liquid petroleum gas and natural gas at the minimum concentration of gas in the air is 200 ppm and the maximum concentration of gas in the air is 10 000 ppm. Design and build a…
Classification
|
Description
Innovation is very important in modern times to improving the quality of a product in industry of construction. A ladder is a piece of equipment consisting of repeated bars or steps (rungs) between two upright lengths of metal, wood, or rope that…
|
Description
Eggs are the main raw material food sector in Malaysia. Conventionally, separation of eggs by its grade has been done manually which consume the slower process. An Electro Egg Sorting Machine was developed by using weigh methods to overcome the…
Classification
|
Description
Nowadays, solar technology is one of the new technologies that produce electricity. There are various types of solar systems used in housing and industry such as Off-grid system, on-grid system, hybrid system and so on to generate electricity. One…
Classification
|
Description
Comprehensive three-tier hierarchical voltage control system, with adaptive clustering method to reconfigure control zones. It is made up of hardware and software to provide system-wide optimizion and local control devices of power plants and…
Classification
|
Description
Effective and competitive cost technique to stabilize shallow slope failure. It uses special used tires arranggement and construction with suitable plant to prevent soil erosion. Applicable to slopes along the higway, residential area, along river…
Classification
|